Getting Started with Gap Tap
Most floor gaps can be fixed in under 60 seconds. Here's how to use your Gap Tap kit.
Before You Start
- Wear safety glasses and gloves when using Gap Tap.
- Keep fingers and body parts clear of the striking area.
- Verify your floor is a floating click-lock installation (not nailed or glued down).
Step-by-Step Instructions
1
Prepare
- Remove debris from the gap with a vacuum, toothpick, or other tool.
- Clean the panel with a microfiber cloth and let it dry.
- For grooved or textured floors, lay the included silicone pad between the Gap Tap and the floor to enhance the seal.
- For matte or porous grooved floors, apply a thin layer of silicone grease around the edge of the suction cup for a stronger seal.
2
Position
- Place the suction cup on the floor panel closest to the wall, in-line with the gap.
- Press down and lock the suction cup firmly.
3
Tap
- Strike the designated area with the included mallet.
- Repeat until the gap is closed.
- Unlock and remove Gap Tap when done.
Pro Tip: Start with smaller gaps first to get comfortable with the tool. Once you've mastered the technique, larger gaps become much easier to close.